Concert hall smoking detector for Bogota Buyers: Smoking Detection Alarm Export from Wanlin China Fa

The A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head ships with these headline parameters: alarm threshold aerosol dose 0.6 g per 3 second burst, heat head selectable at 60, 80 or 100 deg c for fixed-temperature verification and an 8 deg c per minute ramp for rate-of-rise verification, accuracy class heat head held to +/-3 deg c at the set point, aerosol dose repeatability within +/-5% across 500 bursts per canister, response timer resolution 0.1 s, response time photoelectric detectors respond within 2-8 s of a 3 s burst, ionisation within 1-5 s, heat head reaches the set point within 25 s and holds it for the 120 s test window, power supply rechargeable 18650 3.7v 2600 mah pack with 5v 2a usb-c charging, roughly 400 bursts or 90 heat cycles per charge drawing 1.8 w with the heat head active, 0.4 w aerosol-only, 0.2 w standby, output usb-c service port for firmware and log export, plus a 2.4 ghz ble link to the maintenance app that uploads the test record with detector id, timestamp and measured response time, coverage one unit services a full building round; the telescopic pole reaches 1.2 m to 4.5 m ceiling heights and the dispersion cup fits 100 mm to 160 mm detector housings, alarm output green pass and red fail led with an audible confirmation tone, a 0.1 s resolution response timer on the display, and a dated per-device record in the app exportable to csv or pdf, ip42 handheld body, ip54 with the transit case closed enclosure, -10 deg c to +50 deg c operating range and 220 mm x 90 mm x 70 mm handheld body at 620 g with the battery, pole collapsing to 1.2 m. As of September 20, 2026, Wanlin Group (Shenzhen, China) officially launches its 2026 smoking detection alarm export programme, featuring the A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head as the flagship OEM and ODM component for overseas buyers, cross-border trading companies, hotel and hospital groups, facility managers and regional distributors who are sourcing cigarette smoke and vape detection hardware from a China-based source factory under the Wanlin brand. The new release targets importers, hotel and resort operators, hospital estate teams, school and university housing offices, airport and transit operators, mall and office facility managers, system integrators, insurers, wholesale distributors and public procurement tender bidders who source certified smoking detection equipment directly from a Chinese manufacturer rather than paying the western brand premium of Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor. Wanlin Group as the smoking detection alarm supplier, exporter and original manufacturer now opens its doors to global local partners, regional exclusive distributors, overseas cooperation partners and strategic OEM clients across 60+ destination markets.

Core parameters: A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head, a pressurised non-flammable aerosol is metered through a valve into a soft dispersion cup that seals against the detector housing, while the optional heat head raises a ptc ceramic element to a set temperature under closed-loop control. Sensing element calibrated aerosol metering valve with a dose counter, plus a ptc ceramic heating element and a pt1000 chamber probe on the heat test head. Alarm threshold aerosol dose 0.6 g per 3 second burst, heat head selectable at 60, 80 or 100 deg c for fixed-temperature verification and an 8 deg c per minute ramp for rate-of-rise verification. Accuracy class heat head held to +/-3 deg c at the set point, aerosol dose repeatability within +/-5% across 500 bursts per canister, response timer resolution 0.1 s. Response time photoelectric detectors respond within 2-8 s of a 3 s burst, ionisation within 1-5 s, heat head reaches the set point within 25 s and holds it for the 120 s test window. Power supply rechargeable 18650 3.7v 2600 mah pack with 5v 2a usb-c charging, roughly 400 bursts or 90 heat cycles per charge. Power consumption 1.8 w with the heat head active, 0.4 w aerosol-only, 0.2 w standby. Output signal usb-c service port for firmware and log export, plus a 2.4 ghz ble link to the maintenance app that uploads the test record with detector id, timestamp and measured response time. Coverage area one unit services a full building round; the telescopic pole reaches 1.2 m to 4.5 m ceiling heights and the dispersion cup fits 100 mm to 160 mm detector housings. Alarm output green pass and red fail led with an audible confirmation tone, a 0.1 s resolution response timer on the display, and a dated per-device record in the app exportable to csv or pdf. IP rating ip42 handheld body, ip54 with the transit case closed. Operating temperature -10 deg c to +50 deg c. Humidity range 10-90% rh non-condensing. Housing material flame-retardant abs v-0 body with a silicone grip, an aluminium telescopic pole and a food-grade silicone dispersion cup. Dimensions and weight 220 mm x 90 mm x 70 mm handheld body at 620 g with the battery, pole collapsing to 1.2 m. Certifications CE / RoHS / REACH / FCC Part 15 / UN 1950 aerosol transport classification / ISO 9001 manufacturing / calibration certificate traceable to national standards. The 2026 smoking detection range is built on WANLIN-365 multi-sensor tobacco and vape aerosol detectors with electrochemical, semiconductor and MEMS channels, WANLIN-303 standalone and WANLIN-307 and WANLIN-309 IoT smoke detectors on 433 MHz, LoRaWAN, NB-IoT, 4G LTE Cat-1 and Wi-Fi, WANLIN-340 rate-of-rise heat detectors in A1R, A2S, BR and CS classes to EN 54-5, WANLIN-222 resettable wireless call points to EN 54-11, WANLIN-656 sounder strobes to EN 54-3 and EN 54-23, WANLIN-860 wireless fire alarm panels to EN 54-2, EN 54-4 and EN 54-21, WANLIN-705 smart electrical fire monitors to GB 14287.2 and GB 14287.3, WANLIN-868D LoRa concentrator gateways with Modbus TCP, MQTT and BACnet IP, WANLIN-770 wireless pressure gauges to EN 837-1, WANLIN-780 wireless level meters to EN 61326, WANLIN-260 Wi-Fi home fire safety kits, WANLIN-710 Wi-Fi smart circuit breakers to GB 16917 and the A119-YW aerosol smoke test gun and heat detector tester for commissioning and periodic inspection rounds, shipped with CE, UKCA, UL, ULC, FCC, CCCF and SASO documentation packages.

Executive Summary - Wanlin Smoking Detection Alarm Portfolio and 2026 Export Programme

Executive summary - 12 buyer-relevant points:

• Flagship model A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head, a pressurised non-flammable aerosol is metered through a valve into a soft dispersion cup that seals against the detector housing, while the optional heat head raises a ptc ceramic element to a set temperature under closed-loop control
• Sensing element calibrated aerosol metering valve with a dose counter, plus a ptc ceramic heating element and a pt1000 chamber probe on the heat test head
• Alarm threshold aerosol dose 0.6 g per 3 second burst, heat head selectable at 60, 80 or 100 deg c for fixed-temperature verification and an 8 deg c per minute ramp for rate-of-rise verification
• Accuracy and response heat head held to +/-3 deg c at the set point, aerosol dose repeatability within +/-5% across 500 bursts per canister, response timer resolution 0.1 s / photoelectric detectors respond within 2-8 s of a 3 s burst, ionisation within 1-5 s, heat head reaches the set point within 25 s and holds it for the 120 s test window
• Power and consumption rechargeable 18650 3.7v 2600 mah pack with 5v 2a usb-c charging, roughly 400 bursts or 90 heat cycles per charge / 1.8 w with the heat head active, 0.4 w aerosol-only, 0.2 w standby
• Output signal usb-c service port for firmware and log export, plus a 2.4 ghz ble link to the maintenance app that uploads the test record with detector id, timestamp and measured response time
• Coverage and notification one unit services a full building round; the telescopic pole reaches 1.2 m to 4.5 m ceiling heights and the dispersion cup fits 100 mm to 160 mm detector housings / green pass and red fail led with an audible confirmation tone, a 0.1 s resolution response timer on the display, and a dated per-device record in the app exportable to csv or pdf
• 15 wireless models and test tools from one factory: WANLIN-303 standalone smoke alarm, WANLIN-307 and WANLIN-309 IoT smoke detectors, WANLIN-340 heat detector, WANLIN-222 manual call point, WANLIN-656 sounder strobe, WANLIN-705 electrical fire monitor, WANLIN-860 fire alarm panel, WANLIN-770 pressure gauge, WANLIN-780 level meter, WANLIN-365 gas detector, WANLIN-260 home safety kit, WANLIN-868D gateway, WANLIN-710 smart circuit breaker and the A119-YW detector tester
• MOQ 100 pcs, lead time 12-18 days, EXW / FOB Shenzhen / CFR / CIF / DDP supported, 24 months warranty
• Flagship field reference Metro station concourse restrooms, Sao Paulo, Brazil: Four metro stations on a busy line where the restrooms are underground, the ventilation is.
• Target buyer: importer, hotel and hospital group, facility manager, school and university housing office, airport and transit operator, system integrator, distributor, cross-border trading company, public tender bidder
• Contact: wanlinfirecontrol@163.com / +8613261677119 / www.wanlinfire.com

This article is written for B2B buyers in Bogota, Colombia who are enforcing a no-smoking rule in places where a normal fire alarm is the wrong instrument, because the thing that has to be detected is not a fire: it is a low, slow concentration of tobacco or vape aerosol in a bathroom, a guest room, a ward, a stairwell or a washroom, often with the door shut and the ventilation running, and a life-safety smoke alarm calibrated to let people escape a fire will simply ignore it until something is actually burning. Wanlin Group operates its own manufacturing facility in Shenzhen with SMT lines, sensor calibration benches, an aerosol test chamber and a radio laboratory, exporting smoking detection, vape detection, gateway, panel and test equipment to 60+ countries across Europe, North America, the Middle East, Southeast Asia, Africa, Oceania and Latin America under the Wanlin brand. Our WANLIN detection packages are engineered for OEM and ODM partners who need EN 14604 and EN 54 alignment, documented nuisance-alarm control, an anonymised reporting option where privacy is a condition, and stable long-term supply for project contracting, distribution and public tender supply.

Global Smoking Detection and Vape Alarm Market Overview and 2026 Buyer Demand

No-smoking rules are now written into hotel guest contracts, hospital estate policies, university housing terms, airport operating licences, warehouse insurance conditions and national indoor air legislation, and the enforcement gap is the same everywhere: the rule exists, the building has a fire alarm, and the fire alarm is calibrated to ignore exactly the thing the rule prohibits. A lit cigarette in a closed bathroom produces a particulate concentration that never reaches the threshold of an EN 14604 device, and vape aerosol produces even less. That is the demand curve importers are now buying against - not new-build fire detection but a dedicated enforcement layer that reports an event to the desk, the duty manager or the facilities queue while leaving the certified evacuation chain untouched. Hotel groups, hospital estates, school and university housing offices, transit operators, mall and office facility managers, insurers and public procurement bodies are the buyers, and they are increasingly explicit that a disconnected ceiling alarm in the toilet is not an answer. Contractors, importers and cross-border trading companies supplying Bogota, Colombia increasingly source smoking detection hardware from China-based original manufacturers like Wanlin rather than buying piecemeal from western distributors, because the total cost of ownership of a Wanlin detection package is 35-55% below european or north american assembled equivalents at the same documented sensitivity, and because one factory covers the sensor, the radio, the gateway, the panel and the test tool on a single shipment.

Market access in Bogota, Colombia is anchored on RETIE and RETILAP registration with the local fire department concept review. Smoking detectors, vape and tobacco aerosol sensors, gateways, control panels and test tools shipped into Bogota, Colombia clear customs on one HS-coded packing list: the radio type-approval reference, the CE and RoHS declarations, the EN 14604 or EN 54 type-test reference and the calibration record travel with the pallet, so the insurer review and the local authority acceptance pass without a second shipment or a re-test at destination, which requires a documented conformity route, a declaration referencing the applicable product standard, a radio type-approval reference for the wireless models and third-party approval body involvement where the scheme demands it. Cross-border buyers are advised to verify the declaration, the type-test report and the approval body reference of every device prior to import, since non-compliant or un-certificated detection devices may be rejected by customs authorities, refused by the insurer, or invalidate the building fire certification.

Reference: EN 14604 smoke alarm devices, EN 54 series for fire detection and fire alarm systems, EN 54-25 radio transmission for fire systems, EN 54-21 remote transmission, ISO 7240, EN 50194 and EN 50291 gas and CO detection practice, NFPA 72 and BS 5839 system design and maintenance practice, FCC and CE radio type-approval for the 433 MHz, LoRaWAN, NB-IoT, LTE and Wi-Fi models, plus local building, privacy and workplace air-quality requirements in the destination market, and Wanlin Group 2026 smoking detection alarm export programme documentation.

Smoking Detection Engineering - Sensing Channels, Nuisance Rejection, Wireless Transport and Privacy Design

The A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head is engineered inside a four-stage smoking detection architecture rather than as a standalone gadget: (1) a sensing stage that resolves the particulate and vapour signature of tobacco and vape aerosol instead of the combustion curve a fire alarm looks for, because the two are not the same signal; (2) a nuisance-rejection stage that separates that signature from shower steam, deodorant spray, hand-dryer heat and cleaning chemicals, which is where most competing products fail in the first month; (3) a supervised wireless transport stage that carries the event to the desk, the BMS or the cloud on 433 MHz, LoRaWAN, NB-IoT, 4G LTE Cat-1 or Wi-Fi depending on who owns the network and who pays the bill; and (4) a response stage where the rule is explicit - an alert to housekeeping, the duty manager, the nurse station or the facilities queue, with the certified evacuation chain either untouched or connected through one supervised contact the local fire officer controls. Because the package is sold as one design, the sensitivity step, the confirmation window, the radio choice and the privacy configuration all come from the same specification instead of four vendors each protecting their own part of the liability.

Three sub-modules define the engineering depth:

• Sensing front end - Calibrated aerosol metering valve with a dose counter, plus a PTC ceramic heating element and a PT1000 chamber probe on the heat test head. Aerosol dose 0.6 g per 3 second burst, heat head selectable at 60, 80 or 100 deg C for fixed-temperature verification and an 8 deg C per minute ramp for rate-of-rise verification holds the alarm threshold across temperature, humidity and contamination drift.
• Power and signal interface - Rechargeable 18650 3.7V 2600 mAh pack with 5V 2A USB-C charging, roughly 400 bursts or 90 heat cycles per charge. USB-C service port for firmware and log export, plus a 2.4 GHz BLE link to the maintenance app that uploads the test record with detector ID, timestamp and measured response time plus 1.8 W with the heat head active, 0.4 W aerosol-only, 0.2 W standby covers new-build addressable loops, 4-20 mA instrumentation loops and legacy conventional zone retrofits.
• Alarm output and enclosure - Green pass and red fail LED with an audible confirmation tone, a 0.1 s resolution response timer on the display, and a dated per-device record in the app exportable to CSV or PDF. One unit services a full building round; the telescopic pole reaches 1.2 m to 4.5 m ceiling heights and the dispersion cup fits 100 mm to 160 mm detector housings coverage plus IP42 handheld body, IP54 with the transit case closed housing keeps the site audible, visible and serviceable in harsh wash-down and high-humidity environments.

Featured Model - A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head Technical Signature

The featured model is A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head, part of the Fire Detector Test Equipment - Aerosol Smoke Test Gun and Heat Detector Tester family, configured as the aerosol dispenser build (1 variant). FOB Shenzhen reference price is $68.00 per piece at MOQ 100 pcs, with bulk tier pricing ranging $59.16-$75.48 depending on detection class, measuring range, enclosure rating, output protocol variant, certification scope and packaging artwork. Lead time is 12-18 days from PO confirmation and 30% T/T deposit receipt, with 24 months warranty.

The unique technical signature of A119-YW on this variant combination is documented in the table below. Every parameter listed is engineering-verified by our Shenzhen lab and cross-checked against the applicable EN 54, ISO 7240, UL or EN 837-1 product standard, the declaration of conformity scope, the system compatibility statement and the accuracy and response time requirement of the destination market.

Application Scenarios across Hotels, Hospitals, Airports, Campuses, Malls, Offices and Warehouses

Wanlin smoking detection packages are working across six continents: Dubai Marina serviced apartments, Changi airport transit toilets, a Greater Manchester mental health ward, Riyadh mall restrooms, a Berlin student residence, Shinjuku karaoke rooms, La Defense office washrooms, a Sydney CBD tower, Rustenburg mining ablution blocks, Sao Paulo metro restrooms, a Gangnam gaming venue, Kuala Lumpur strata offices, an Amsterdam detention facility, a Toronto residence, a Mumbai private hospital, an Istanbul hotel, a Nairobi UN compound, Mexico City airport, a Makati call centre and a Warsaw logistics warehouse. Below are 5 detailed scenarios drawn from those deployments, each with a site, a device count, a radio and privacy configuration, an installation window and a measured or witnessed outcome rather than a capability claim.

Scenario 1: Metro station concourse restrooms, Sao Paulo, Brazil. Four metro stations on a busy line where the restrooms are underground, the ventilation is mechanical and the operator cannot run any new cable because every route through the public areas requires a permit and an engineering study. The concessionaire therefore asked for a battery device with a multi-year life and no infrastructure, which pointed at WANLIN-303 standalone units with a 10-year cell, plus one WANLIN-656 repeater per station so staff hear the alert at the ticket office rather than inside the restroom. Portuguese-language manuals and the INMETRO referencing documentation were supplied with the first shipment because the concessionaire procurement desk will not release payment without them. Installation was 3 nights per station with two technicians and no closure of any restroom for more than 40 minutes. The operator reported 340 events in the first four months, concentrated in the two stations with the longest platform dwell times, and used the pattern to move one cleaning round and to install signage at the exact turnstile groups where the events clustered.

Scenario 2: PC bang and esports venue, Gangnam, Seoul, South Korea. A 220-seat gaming venue where smoking is banned by national indoor air rules and the owner had already been fined once. The difficulty is the environment: 220 running PCs produce constant airflow and heat, vape aerosol is chemically different from cigarette smoke, and the clientele is young enough that any device within reach will be tested. The installed scheme uses WANLIN-307 units on NB-IoT at ceiling level with the sensitivity profile set for the particulate signature of vape aerosol rather than combustion smoke, a tamper switch on every housing, and the alert routed to the counter tablet rather than to a building sounder so the venue is not emptied every time someone vapes in the row behind the screen. KC referencing documentation and a Korean-language manual were supplied. Installation took two nights. Over the next five months the venue recorded 128 events and no repeat municipal complaint, and the owner now cites the event log as evidence of active enforcement whenever the district office inspects.

Scenario 3: Grade A office tower washrooms, Kuala Lumpur City Centre, Malaysia. A twin-tower office complex where the management corporation wanted smoking detection on 46 floors but the building is strata-titled, which means every common-property spend above a threshold needs a resolution and the resolution needs a number. Wanlin priced the whole estate as one package with SIRIM referencing documentation and a per-floor cost, which is what allowed the committee to pass it. The engineering detail that mattered was the ceiling: the washrooms have metal pan ceilings with 600 mm tiles, so the standard base does not sit flush and the mounting plate had to be supplied separately for the whole estate. WANLIN-309 Wi-Fi units were used because the tower already runs guest Wi-Fi on every floor and the committee refused to fund a second radio network. Rollout was four floors per night over 12 nights. The corporation now publishes a quarterly anonymous floor ranking in the lobby, which has done more to change behaviour than the alarms themselves.

Scenario 4: Detention facility cell wings, Amsterdam, Netherlands. A remand facility with four wings where smoking is prohibited but tobacco is the de facto currency, and where the two hard requirements were that the device must be impossible to dismantle into a weapon or a lighter and that it must not be able to identify an individual for evidential purposes. The delivered configuration is a WANLIN-365 sensor in a flush-mount IP65 housing with security screws, no local sounder at all, and an event record that carries only wing and time. Staff response is a wing walk. The facility runs its own LoRaWAN network for door and plant telemetry, so the detectors joined it rather than adding a parallel system. Commissioning took five days plus a one-day session with the works council that was, by the facility account, the longest part of the project. Eighteen months on, the wing-level event counts are used in the monthly security review and have displaced a good deal of guesswork about which wing has the tobacco problem.

Scenario 5: University residence vape enforcement, Toronto, Canada. A 1,100-bed residence where cigarette smoking was largely solved by campus policy years ago and the live problem is cannabis and vape use in bathrooms and stairwells, which the standard ionisation chambers the residences had bought in 2015 simply do not see. The residence life office wanted a data set rather than an alarm: how many events, in which buildings, at what hour. Wanlin supplied WANLIN-307 units on the campus LoRaWAN network with the reporting set to an aggregate count per building per hour, no audible device, and a privacy notice drafted with the university counsel confirming that no device records audio, video or identity. Installation across nine buildings took 14 days during the summer break. The first term produced a heat map that moved student conduct staffing from a flat rota to two evening shifts on the three buildings that generated 72% of the events, and the residence office has published the anonymised methodology to the student union.

Wanlin Competitive Advantages for Cross-Border Smoking Detection Buyers

The A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head and the wider Wanlin smoking detection package deliver 10 distinct advantages for cross-border B2B buyers who source no-smoking enforcement hardware directly from a Chinese manufacturer:

1. Source-factory pricing - Wanlin operates the SMT lines, the aerosol calibration chamber and the radio laboratory, so FOB Shenzhen smoking detection pricing is 35-55% below Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor distributor prices for the same type-test scope.
2. Full type-test documentation - every device family ships with the EN 14604, EN 54 or ISO 7240 test report reference, the declaration of conformity, the radio type-approval reference and a per-unit calibration record, removing the largest documentation blocker for importers.
3. One platform, many national conformity routes - SASO SABER PCoC per SKU and SCoC per shipment for the Kingdom, ECAS for the UAE and G-Mark for the wider GCC, plus CE and UKCA for Europe, UL and ULC for North America, INMETRO for Brazil, BIS for India, SIRIM for Malaysia, TISI for Thailand, SNI for Indonesia, DTI-BPS for the Philippines, NOM for Mexico, KC for Korea, SABS for South Africa, SONCAP for Nigeria, CCCF for China and ActivFire for Australia, documented per SKU so the authority submittal and the approval review in each destination market complete in weeks rather than months.
4. Open integration instead of closed protocol - Modbus, BACnet, OPC-UA, 4-20 mA, relay, NB-IoT, LoRaWAN, 4G LTE Cat-1 and Wi-Fi keep the site open to third-party BMS, ARC, SCADA, hotel PMS and cloud platforms instead of a 15-year single-vendor lock-in.
5. Complete detection package from one factory - WANLIN-365 multi-sensor tobacco and vape aerosol detectors, WANLIN-303 standalone and WANLIN-307 and WANLIN-309 IoT smoke detectors, WANLIN-340 heat detectors, WANLIN-222 call points, WANLIN-656 sounder strobes, WANLIN-860 panels, WANLIN-868D gateways, WANLIN-705 electrical fire monitors, WANLIN-770 pressure gauges, WANLIN-780 level meters and the A119-YW commissioning tester, all shipped together from one Shenzhen source.
6. Nuisance-alarm engineering instead of a promise - multi-sensor channels that separate tobacco aerosol from steam and deodorant, field-adjustable sensitivity in discrete steps, a configurable 30-120 second confirmation window and a false-alarm history log on the WANLIN-705 platform, so thresholds are tuned on real data rather than guessed at handover.
7. Anonymised reporting where privacy is a condition - aggregate counts per floor or per building per hour with no identity, no audio and no video, plus a privacy wording pack we have already used with a German residents union, a Dutch works council and a Canadian university counsel.
8. Four radio options on one mechanical platform - 433 MHz with no monthly fee where the site has no IT support, LoRaWAN where the building already runs plant telemetry, NB-IoT or 4G LTE Cat-1 where there is only cellular coverage, and Wi-Fi where IT will allow the devices, chosen per building rather than per project.
9. Project-specific ODM depth - housing artwork and colour, a custom default sensitivity profile, a 65 dB reminder level instead of a full alarm where the client wants a tap on the shoulder rather than an evacuation, flush or surface mount plates for 600 mm metal pan ceilings, adhesive mounts where the concrete must not be drilled, and Arabic, Spanish, Portuguese, Korean, Turkish, Polish, German or destination-language manuals, engineered from one factory.
10. Warranty up to 60 months - 60 months for detector and call point families, 36 months for panel, monitor and gas detector families, 24 months for instrumentation and tester families, with free DOA replacement within 60 days.

Combined, these advantages allow Wanlin partners to win hotel group rollouts, hospital estate programmes, school and university housing projects, airport and transit contracts, mall and office facilities packages, warehouse insurance remediation, public procurement tenders and national distributor frameworks, secure regional distribution rights and serve end customers under their own brand at 35-55% lower landed cost compared to legacy western distribution channels.

Certifications, Standards Route and Market Access Compliance

The A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head carries the following certifications as standard scope: CE / RoHS / REACH / FCC Part 15 / UN 1950 aerosol transport classification / ISO 9001 manufacturing / calibration certificate traceable to national standards. Optional add-on documentation available on request includes VdS (Germany), LPCB (United Kingdom), ETL and FM (global insurance), UL and ULC (North America), ActivFire (Australia), CNBOP-PIB (Poland), TZUS (Czech), ATEX and IECEx for hazardous-area devices, KC (Korea), NOM (Mexico), SASO and SABER (Saudi Arabia), and radio type-approval reports per destination for the 433 MHz, LoRaWAN, NB-IoT, LTE and Wi-Fi models. All devices are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Cross-border buyers should note that smoking detection compliance sits on four legs: the alarm device standard such as EN 14604 or the applicable EN 54 part, the radio type-approval for the wireless models in the destination band plan, the system design and maintenance rule such as NFPA 72, BS 5839 or AS 1670 where the device is documented as part of a building system, and the destination conformity route plus environmental declarations. Wanlin supplies a pre-validated compliance pack per model covering DoC templates, type-test references, radio approvals, calibration records and the annual survey template, which typically moves importer approval from a quoted 8-14 weeks down to 2-4 weeks for most markets. Where privacy law applies, Wanlin also supplies the anonymised reporting configuration and the wording pack. What stays local is the installation licence, the acceptance by your authority and any civil work - Wanlin does not contract abroad and does not present itself as a licensed installer in your city.

Detector Order Economics, MOQ, Lead Time and Logistics Math

For a typical first-time buyer ordering 1200 pieces of A119-YW Smoke Detector Tester with Aerosol Dispenser and Heat Test Head, the economics stack is:

Sample order cost is USD 120 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term. L/C at sight is accepted for orders above USD 80,000. Production lead time is 12-18 days. Warranty is 24 months. Free DOA replacement within 60 days of receipt.

Smoking Detector FAQ - Fire Alarm Compared, Nuisance Sources, Privacy, Radio Choice, Certification and Partnership

Below are 8 frequently asked questions from overseas buyers, cross-border trading companies and regional distributors sourcing smoking detection and vape alarm hardware from China. Each answer is anchored on Wanlin actual commercial terms, certification scope and field experience across 60+ export markets under the Wanlin brand.

How is a smoking detector different from the smoke alarm already in the ceiling?

Answer: A life-safety smoke alarm to EN 14604 is calibrated to detect a developing fire so that occupants can leave, and it is deliberately insensitive enough that cooking and steam do not empty a building. A smoking detection device is calibrated for the opposite job: it has to see a low, slow concentration of tobacco or vape aerosol in a room where nothing is burning, and it has to do it while ignoring shower steam, deodorant spray and cleaning chemicals. In practice that means a different sensing channel, a different threshold and a different alarm behaviour - an alert to the desk or the duty manager, not a building evacuation. Wanlin supplies both layers and keeps them separate: the WANLIN-303 platform carries the EN 14604 and EN 54 referencing documentation for the life-safety function, while the WANLIN-365 and WANLIN-307 platforms carry the tobacco and vape aerosol detection function. Buyers who try to use one device for both jobs usually end up either with nuisance alarms or with no detection at all, which is why we ask about the intended response before quoting.

Will shower steam, deodorant or cleaning spray set it off?

Answer: They can, and pretending otherwise is how a rollout fails in the first month. Wanlin manages it four ways: the multi-sensor channel on WANLIN-365 distinguishes the particulate and vapour signature of tobacco aerosol from the water droplet profile of steam; sensitivity is field-adjustable in steps so a humid bathroom can be set one step down; the confirmation window is configurable, typically 30 to 120 seconds, so a transient plume does not raise an event; and the WANLIN-705 platform logs the false-alarm history so thresholds can be tuned on real data rather than guessed. In the Dubai Marina apartment deployment the sensitivity was dropped one step before handover specifically because of shower steam, and the measured nuisance rate across a Changi deployment was 0.3 calls per device per year, with most traced to a cleaning contractor switching to a steam mop. We would rather discuss the nuisance sources at design stage than claim zero false alarms.

Does the device record identity, audio or video, and how do we handle privacy?

Answer: The optical and multi-sensor platforms do not record identity, audio or video; they report a concentration event with a time and a zone. The only Wanlin product that carries a camera is the WANLIN-FD900 flame detection platform, and we actively advise against it in rooms where privacy is the concern - we declined it in the Tokyo karaoke project and in the Toronto residence for exactly that reason. For deployments where a privacy position has to be published, Wanlin supplies an anonymised reporting configuration: aggregate counts per floor or per building per hour, no per-room identity. That configuration is what allowed the Berlin housing association residents union, the Amsterdam works council and the Toronto university counsel to accept the installation, and we will supply the wording we have used before as a starting point for your own review.

How fast does it respond, and can the threshold be adjusted per site?

Answer: Typical response to a lit cigarette in a closed bathroom is 20 to 60 seconds depending on room volume and ventilation; response to vape aerosol is slower because the particulate mass is lower, and vape deployments are normally set with a longer confirmation window. Sensitivity is adjustable in discrete steps on the WANLIN-365 and WANLIN-307 platforms, and the confirmation window is set in the panel or the gateway configuration, so a hotel bathroom, a hospital corridor and a warehouse loading bay can each be tuned differently on the same hardware. For reference, the WANLIN-303 platform reports response in seconds to the documented fire curve, the WANLIN-365 in seconds against the tobacco particulate profile, and every shipped unit carries its own calibration record in the specification block that accompanies the article and the datasheet.

Which wireless option should we choose - 433 MHz, LoRaWAN, NB-IoT, 4G or Wi-Fi?

Answer: It depends on who owns the network and who pays the bill. If the site has no IT support and no appetite for a monthly fee, the 433 MHz group with a WANLIN-860 panel is usually right and it is what the Berlin housing association and the Istanbul hotel chose. If the building already runs a LoRaWAN network for plant or door telemetry, joining it is usually free and is what the Rustenburg mine, the Mumbai hospital and the Warsaw warehouse did. If there is no network and no Wi-Fi but there is cellular coverage and a willingness to pay a small annual fee, NB-IoT or 4G LTE Cat-1 is the answer. If the building already has reliable Wi-Fi and the IT department will allow the devices on it, WANLIN-309 is the cheapest to deploy and is what the Riyadh mall and the Makati call centre used. Wanlin ships all four radio options on the same mechanical platform, so the choice can be made per building rather than per project.

What certifications and import documents do you supply, and what stays local?

Answer: Every shipment carries the CE and RoHS and REACH declarations, the FCC declaration for radio models, the EN 14604 or EN 54 referencing statement as applicable to the SKU, the type-test reference, the calibration record and a multi-language manual. On request we supply UL and ETL documentation for North America, UKCA for Great Britain, SASO SABER PCoC per SKU and SCoC per shipment for Saudi Arabia, ECAS for the UAE, BIS for India, SIRIM for Malaysia, TISI for Thailand, SNI for Indonesia, DTI-BPS for the Philippines, NOM for Mexico, INMETRO for Brazil, KC for Korea, SABS for South Africa and CCCF for China. What stays with your company is the installation licence, the acceptance by your local authority and any civil work. Wanlin does not hold a contracting licence abroad and does not present itself as a licensed installer in your city, and we say so in writing because it is the question that comes back at audit.

What are MOQ, lead time, warranty and the OEM options?

Answer: MOQ is 200 pieces per detector SKU for the standard housing and 500 pieces for private-label artwork; mixed containers are accepted and most first orders are one project kit rather than a single SKU. Lead time is 10-18 days for in-stock configurations from PO and deposit, 25-35 days for custom artwork, custom threshold profiles or non-standard housings. Warranty is 60 months on detector and sensor families, 36 months on control and gateway families, with DOA replacement inside 60 days. OEM covers your brand on the housing and carton, your manual and insert, your name as importer of record on the documentation with Wanlin as manufacturer, and a custom default threshold profile if your market needs one. Sample orders are charged at cost and refunded against the first bulk order above MOQ.

How does the partnership work for distributors and project contractors?

Answer: There are four routes. Project supply is for contractors buying against their own jobs, priced per project with the documentation pack included. Authorised reseller carries territorial protection and list pricing with a co-marketing contribution. Regional exclusive distribution starts after a first-year volume commitment and adds joint certification cost-sharing and a protected country. Strategic OEM is where the product carries your brand and your documentation cover, with a dedicated engineering contact and an 18-month price lock. All partners receive firmware updates for the life of the product, DOA replacement inside 60 days, a named account manager with a four-business-hour response target, destination-language manuals, and one joint booth per year at Intersec Dubai, Security Essen, Secutech, Firex International or Canton Fair on a cost-share basis. Wanlin is recruiting global local partners now and will happily start with a single pilot building before anyone commits to a container.

Wanlin Global Partner Stories - Real Smoking Detection Project References across 60+ Markets

Wanlin smoking detection packages have shipped to 60+ markets across 6 continents, with the United Arab Emirates, Saudi Arabia, Singapore, the United Kingdom, Germany, Japan, Australia, South Africa, Brazil, South Korea, Malaysia, the Netherlands, Canada, India, Turkey, Kenya, Mexico, the Philippines and Poland among the most active sourcing routes. Below are 4 anonymised project references drawn from 2024-2026 installations. Each record states what the earlier scheme was, what was actually installed, and what was measured or witnessed, rather than restating a capability claim.

Case 1: Strata office complex clears an essential safety measures audit, Australia. An 18-level Sydney office building failed an essential safety measures audit because smoke detection in the restroom areas had been disconnected and never reinstated, and the owner needed closure before the insurer would renew on the same terms. The consultant required AS 1670 alignment, which meant the devices had to be documented as part of the building system rather than bought as standalone gadgets. Wanlin supplied WANLIN-309 and WANLIN-340 units with a WANLIN-860 panel, a zone map, the AS 1670 referencing statement and the annual survey template the contractor signs. Twenty-six locations, including two stairwells that had never had coverage, were installed in six days. The audit was closed at the next visit and the owner has reused the same documentation pack for a second tower, which is the outcome the consultant was hoping for - a template, not a one-off fix.

Case 2: Rail operator avoids cable permits with a ten-year battery design, Brazil. A metro concessionaire needed smoking detection in four underground station restrooms but could not run new cable because every route through the public areas requires a permit and an engineering study, and the study alone costs more than the detection package. The design that cleared it was battery WANLIN-303 units with a ten-year cell, no infrastructure, and one WANLIN-656 repeater per station so staff hear the alert at the ticket office. INMETRO referencing documentation and Portuguese-language manuals were supplied with the shipment because procurement will not release payment without them. Each station took three nights and no restroom was closed for more than 40 minutes. The 340 events recorded in four months clustered in the two stations with the longest platform dwell times, and the operator used that to move one cleaning round and to place signage at the specific turnstile groups rather than blanket the whole station.

Case 3: Hospital insurer condition met without modifying a legacy panel, Eastern Europe. A 900-bed hospital was told by its insurer that smoking in ward bathrooms had to be addressed, but its fire alarm panel was a legacy system the manufacturer no longer supported and the fire consultant would not permit any modification that would trigger re-certification of the whole loop. Wanlin supplied WANLIN-365 units in the bathrooms and WANLIN-340 thermal units in corridors and lounges on a private LoRaWAN network with a WANLIN-868D gateway, wired to the hospital nurse-call monitoring screen rather than to the fire panel, and a single supervised contact available for future use. Installation was staged over three weeks with infection control clearance per zone. The insurer accepted the arrangement. The useful lesson for the hospital estate team was that a monitoring layer and a certified fire layer can be kept legally and electrically separate, which has since unblocked two other projects that were stuck on the same panel problem.

Case 4: Middle East mall operator integrates smoking events with washroom cleaning tickets. A Riyadh mall with 34 restroom clusters wanted smoking events to appear in the same dashboard as HVAC and washroom-cleaning tickets rather than in a separate app nobody opened. The mall already had full Wi-Fi and did not want a second radio network, so WANLIN-309 units were used per cluster with one WANLIN-868D gateway bridging onto the BMS over Modbus TCP; the point mapping took one afternoon. SABER PCoC was registered per SKU before the order and SCoC travelled with the packing list. Sixteen nights of installation, three-man team. The first three months produced 214 events, 188 of them after 22:00 in the two ground-floor restrooms nearest the food court, and cleaning was rescheduled around that pattern. The mall has since written the Modbus point list into its standard BMS scope for new developments.

Partnership Models - Project Supply, Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers 3 partnership tiers for cross-border smoking detection buyers, hotel and hospital groups, facility contractors and overseas cooperation partners:

All partners receive: free firmware updates for life of product, free DOA replacement within 60 days, dedicated account manager and WhatsApp response within 4 business hours, free certification documentation and test report copies, destination-language manual support, anonymised reporting configuration where privacy law requires it, and one joint trade-show booth per year at Intersec Dubai, Security Essen, NFPA Conference, Firex International, Secutech, SICUR, FeuerTrutz, FireExpo or Canton Fair on a cost-share basis.

Conclusion - How to Start Your Smoking Detector Sourcing Today

Wanlin Group 2026 smoking detection alarm export program is now open for global B2B buyers, regional distributors, hotel and hospital groups, facility management contractors, cross-border trading companies and OEM and ODM partners across 60+ destination markets. To initiate a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, please contact our export team via the channels below. Sample orders ship within 3-7 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 12-18 days. Strategic OEM Partner applications are reviewed quarterly and require a minimum USD 320,000 annual commitment.

We sincerely invite global fire and safety equipment buyers, national importers, hotel and hospital estate teams, facility management companies, school and university housing offices, transit operators, system integrators and cross-border trading companies to engage in long-term cooperation with Wanlin Group as your China-based OEM and ODM partner, regional exclusive distributor or strategic global supplier under the Wanlin brand. Wanlin is the Chinese source factory behind 60+ country detection projects, the SMT lines, aerosol calibration chamber and radio laboratory behind every batch, and this 12-section export program. Let us build safer buildings together.

Article signature:

working_principle: A pressurised non-flammable aerosol is metered through a valve into a soft dispersion cup that seals against the detector housing, while the optional heat head raises a PTC ceramic element to a set temperature under closed-loop control
sensing_element: Calibrated aerosol metering valve with a dose counter, plus a PTC ceramic heating element and a PT1000 chamber probe on the heat test head
alarm_threshold: Aerosol dose 0.6 g per 3 second burst, heat head selectable at 60, 80 or 100 deg C for fixed-temperature verification and an 8 deg C per minute ramp for rate-of-rise verification
accuracy_class: Heat head held to +/-3 deg C at the set point, aerosol dose repeatability within +/-5% across 500 bursts per canister, response timer resolution 0.1 s
response_time: Photoelectric detectors respond within 2-8 s of a 3 s burst, ionisation within 1-5 s, heat head reaches the set point within 25 s and holds it for the 120 s test window
power_supply: Rechargeable 18650 3.7V 2600 mAh pack with 5V 2A USB-C charging, roughly 400 bursts or 90 heat cycles per charge
power_consumption: 1.8 W with the heat head active, 0.4 W aerosol-only, 0.2 W standby
output_signal: USB-C service port for firmware and log export, plus a 2.4 GHz BLE link to the maintenance app that uploads the test record with detector ID, timestamp and measured response time
coverage_area: One unit services a full building round; the telescopic pole reaches 1.2 m to 4.5 m ceiling heights and the dispersion cup fits 100 mm to 160 mm detector housings
alarm_output: Green pass and red fail LED with an audible confirmation tone, a 0.1 s resolution response timer on the display, and a dated per-device record in the app exportable to CSV or PDF
ip_rating: IP42 handheld body, IP54 with the transit case closed
operating_temp: -10 deg C to +50 deg C
humidity_range: 10-90% RH non-condensing
housing_material: Flame-retardant ABS V-0 body with a silicone grip, an aluminium telescopic pole and a food-grade silicone dispersion cup
dimensions_weight: 220 mm x 90 mm x 70 mm handheld body at 620 g with the battery, pole collapsing to 1.2 m
certifications: CE / RoHS / REACH / FCC Part 15 / UN 1950 aerosol transport classification / ISO 9001 manufacturing / calibration certificate traceable to national standards

• Author: Wanlin Group Fire Detection Division Export Engineering Team
• Published: 2026-09-20 16:12
• Data sources: Wanlin Group 2026 smoking detection alarm export programme documentation, aerosol chamber calibration records per production lot, EN 14604 and EN 54 type-test references, radio type-approval records for the 433 MHz, LoRaWAN, NB-IoT, LTE and Wi-Fi models, nuisance-alarm statistics from deployed hotel, hospital, transit and campus sites, anonymised reporting configuration notes where privacy law applies, installer commissioning records exported from territorial partner projects, RoHS, REACH and WEEE declarations.
• Shenzhen HQ: Wanlin Group (Wanlin Fire Detection Division), Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China


• Reference: www.wanlinfire.com / A119-YW / EN 14604 / EN 54 / EN 54-25 / EN 54-21 / EN 50194 / EN 50291 / ISO 7240 / NFPA 72 / BS 5839 / AS 1670 / EN 837-1 / EN 61326 / RoHS REACH WEEE
• Contact: Email wanlinfirecontrol@163.com | Phone +8613261677119 | Website https://www.wanlinfire.com