centralized fire management system, fire alarm central control platform, integrated fire control system, fire command center, unified fire monitoring system
Customer Service Hotline：
+8613261677119
centralized fire management system, fire alarm central control platform, integrated fire control system, fire command center, unified fire monitoring system+8613261677119
Wanlin standardises arabic and english documentation packs for gulf export markets for Madaba and Jordan fire protection contractors, system integrators, electrical wholesalers, distributors and importers. The WANLIN wireless fire line spans WANLIN-860 Wireless Fire Alarm Control Panel (4G / WiFi / Ethernet) and thirteen sibling configurations covering photoelectric and ionization smoke detectors, A1R / A2S heat detectors, resettable and weatherproof manual call points, EN 54-3 and EN 54-23 sounder strobes, the WANLIN-860 addressable fire alarm control panel from 2 to 16 loops, WANLIN-770 pressure transmitters and gauges, ultrasonic and radar level sensors, the WANLIN-705 smart power monitoring device with residual current and arc fault detection, catalytic, infrared and electrochemical gas and CO detectors, and the detector test and assessment kit with HFC-free test aerosol. Every carton ships with CE, RoHS, REACH and FCC documentation, EN 54 certificates, SASO and SABER files, NIST-traceable calibration records and SBC 801 / NFPA 72 reference packs — bench-verified on the Madaba QC floor before shipment. OEM/ODM with private label and custom branding, factory-direct export supply for Saudi Arabia, the United Arab Emirates, Kuwait, Qatar, Bahrain, Oman, Jordan, Egypt and Iraq.
Featured equipment this report: WANLIN-860 Wireless Fire Alarm Control Panel (4G / WiFi / Ethernet) — Ethernet host configuration — Wired Ethernet port for permanent installations, with BACnet and Modbus to the BMS and a static IP for the building's network policy; sensing and method EN 54-2 and EN 54-4 control and indicating equipment with wireless registration of the WANLIN detector, call point, sounder, gas and instrumentation family; output and signalling Zonal sounder circuits with 1 A per circuit, programmable cause-and-effect matrix, event log for 4,000 events; connectivity 4G, WiFi or Ethernet uplink with RS-485 repeater bus, BACnet and Modbus to the BMS, dry-contact fire and fault relays; mounting Wall-mounted steel cabinet with hinged door, 2.0 mm back plate, bottom and top cable entry, key-locked access level 2; ingress protection IP30 cabinet, operating 0 to +40 C, 5-95 percent RH non-condensing; enclosure 1.2 mm cold-rolled steel, RAL 3000 red or RAL 7035 grey, 520 x 400 x 160 mm, lockable; indication 480-character backlit LCD with zone LED mimic, keypad access levels, menu in 8 languages; extra features Automatic wireless device mapping, per-device sensitivity readout, scheduled self-test, 72-hour standby battery with charger, cloud and app alerting; warranty and after-sales 3-year limited warranty, 5-year spare-parts window, commissioning support pack, 30-day DOA replacement; in the box Panel cabinet, 2 x 12 V sealed batteries, antenna, key set, device registration sheet, multi-language manual EN/ES/FR/DE/IT/PL/AR. Full specification table below.
Published by Wanlin Manufacturing Group (Wanlin Brand) | Last updated: September 16, 2026 | Expertise: 15+ years fire detection, alarm and instrumentation manufacturing and export
Dispatch note for Madaba: Jordan-bound cartons leave Shenzhen via Aqaba Port on the Red Sea with bonded trucking north into Amman, Zarqa, Irbid, Madaba, Karak, Salt and Mafraq, plus air freight through Queen Alia International. Detectors, panel cabinets, instrumentation and country-specific documentation are consolidated at the factory before sailing; typical door-to-door lead time for Jordan runs 23-30 days after the batch clears pre-shipment inspection — the window most contractors use to land the rough-in and the trim-out inside the same inspection cycle.
Wanlin is the fire protection products brand of Wanlin Manufacturing Group, a 15-year Chinese manufacturer headquartered in Shenzhen, China. The brand builds the detection, control, signalling and instrumentation layer of a fire system — the devices that go on the ceiling, on the wall, in the riser and inside the distribution board — for fire protection contractors, system integrators, electrical wholesalers, facility management groups, civil defence contractors and their distributors across Saudi Arabia, the United Arab Emirates, Kuwait, Qatar, Bahrain, Oman, Jordan, Egypt and Iraq.
Wanlin operates a genuine source factory with in-house injection molding, SMT PCB assembly, detector chamber calibration tunnels, panel burn-in racks, pressure and level calibration benches, gas cell ageing banks and an environmental chamber set for battery and temperature verification. Our factory builds the full WANLIN wireless fire line — all configurations supported by CE marking under the Construction Products Regulation with EN 54 certification, UKCA for Great Britain, RoHS and REACH files, FCC Part 15 and the UL project path for North America, SASO conformity assessment and SABER PCoC / SCoC support for Saudi Arabia, G-Mark support for the GCC, RCM for Australia and New Zealand, and EAC, CCCF, TISI, SNI, SIRIM and PS Mark support for the markets that require national approval, ISO 9001 and ISO 14001 quality systems, NIST-traceable calibration records, custom colour and logo programs, private-label packaging, multi-language manuals (Arabic / English / Urdu / Hindi / Tagalog / French), and spares and consumables programs sized to each partner's annual project volume.
| Parameter | WANLIN-860 Wireless Fire Alarm Control Panel (4G / WiFi / Ethernet) | Typical Import Unit |
|---|---|---|
| Product Type | Ethernet host configuration — Wired Ethernet port for permanent installations, with BACnet and Modbus to the BMS and a static IP for the building's network policy | Single fixed configuration only |
| Sensing Element / Detection Method | EN 54-2 and EN 54-4 control and indicating equipment with wireless registration of the WANLIN detector, call point, sounder, gas and instrumentation family | Uncalibrated element, no method documentation |
| Output and Signalling | Zonal sounder circuits with 1 A per circuit, programmable cause-and-effect matrix, event log for 4,000 events | Basic contact only, no diagnostics |
| Connectivity and Protocol | 4G, WiFi or Ethernet uplink with RS-485 repeater bus, BACnet and Modbus to the BMS, dry-contact fire and fault relays | No protocol, no telemetry, no BMS path |
| Mounting and Installation | Wall-mounted steel cabinet with hinged door, 2.0 mm back plate, bottom and top cable entry, key-locked access level 2 | Proprietary fitting, extra adaptors on site |
| Ingress Protection | IP30 cabinet, operating 0 to +40 C, 5-95 percent RH non-condensing | Unrated enclosure, indoor only |
| Enclosure and Material | 1.2 mm cold-rolled steel, RAL 3000 red or RAL 7035 grey, 520 x 400 x 160 mm, lockable | Recycled plastic, unknown flame rating |
| Indication and Interface | 480-character backlit LCD with zone LED mimic, keypad access levels, menu in 8 languages | Single LED, no test or hush control |
| Extra Features | Automatic wireless device mapping, per-device sensitivity readout, scheduled self-test, 72-hour standby battery with charger, cloud and app alerting | None |
| Certification and Compliance | CE (EU) under the Construction Products Regulation with EN 54-7 / EN 54-5 / EN 54-11 / EN 54-25 / EN 54-3 / EN 54-23 / EN 54-2 and EN 54-4, EN 14604 (smoke alarms), EN 50291 (CO alarms), EN 50194 (gas detectors), UKCA (Great Britain), RoHS, REACH, FCC Part 15 and the UL 217 / UL 268 / UL 521 / UL 2034 / UL 864 project path for North American-linked specifications, SASO conformity assessment with SABER Product Certificate of Conformity (PCoC) and Shipment Certificate of Conformity (SCoC) support for Saudi Arabia, SBC 801 / NFPA 72 design and inspection reference documentation, G-Mark support for the GCC, EAC, CCCF, TISI, SNI, SIRIM, PS Mark and BIS support where the market requires national approval, ISO 9001 + ISO 14001 factory, NIST-traceable calibration records, OEM/ODM and private label | Incomplete or missing |
| Warranty and After-Sales | 3-year limited warranty, 5-year spare-parts window, commissioning support pack, 30-day DOA replacement | No spares path, no documentation support |
| Ships in the Box | Panel cabinet, 2 x 12 V sealed batteries, antenna, key set, device registration sheet, multi-language manual EN/ES/FR/DE/IT/PL/AR | Unit only, no fixings or documentation |
Supply terms: Factory-direct pricing | OEM/ODM and private label | Cartons packed per project phase | CE, RoHS, REACH, FCC, EN 54 and SASO / SABER documentation, NIST-traceable calibration records and SBC 801 / NFPA 72 reference packs with every order | Custom colours, logo printing and carton branding | Spares and consumables programs sized to your annual volume | Sea freight via Aqaba Port on the Red Sea with bonded trucking north into Amman, Zarqa, Irbid, Madaba, Karak, Salt and Mafraq, plus air freight through Queen Alia International, plus air options for urgent project top-ups | Warranty and after-sales spare parts program.
A fire product is only as sellable as the file behind it. In the Kingdom the file has four gates: the SBC 801 design and inspection baseline, the SASO conformity assessment, the SABER Product and Shipment Certificates of Conformity, and the Civil Defense design review and site acceptance — with NFPA 72 as the inspection, testing and maintenance reference SBC 801 draws on, and the EN 54 series as the product evidence Saudi and Gulf reviewers ask to see alongside them. Every Wanlin wireless line is built to be read at all four gates: EN 54-7 smoke detectors, EN 54-5 heat detectors, EN 54-11 manual call points, EN 54-25 components using radio links, EN 54-3 and EN 54-23 sounders and visual alarm devices, EN 54-2 / EN 54-4 control and indicating equipment, EN 14604 residential smoke alarms, EN 50291 CO alarms and EN 50194 gas detectors. The Madaba-bound cartons carry the certificate set, the declaration of conformity and the manual in the language the reviewer reads. Below is how each layer of the stack maps to the WANLIN wireless fire line.
| Requirement | Status on the WANLIN wireless fire line | What it enables for Madaba contractors, distributors and importers |
|---|---|---|
| SBC 801 fire protection design baseline | Wireless detection, call points, sounder strobes and control equipment supplied with an SBC 801 / NFPA 72 design reference pack: device spacing, class selection, cause-and-effect and inspection intervals documented per building type | The design submittal and the device certificates read as one file, which is how a Civil Defense reviewer opens it — no re-work between the design narrative and the product evidence |
| SASO conformity assessment | Product families assessed against the applicable Saudi standard, with the technical file, test reports and declaration of conformity held per model rather than per shipment | The certificate exists before the importer asks for it, so the assessment step is a formality rather than a delay on the critical path |
| SABER PCoC and SCoC | Product Certificate of Conformity registered at product-family level and Shipment Certificate of Conformity issued per consignment, with HS classification and packing lists prepared by the factory | Customs clearance becomes routine: the SCoC is ready when the container is booked, not chased after it sails |
| Civil Defense design review and site acceptance | Consolidated submission dossier — certificates, declarations, Arabic and English manuals, device schedules and commissioning checklists — packed per project phase | First-submission acceptance instead of a re-submission cycle, and a handover pack the site team can actually hand over |
| NFPA 72 inspection, testing and maintenance | Detectors, call points and panels supplied with NFPA 72 inspection and testing documentation, per-device event logging on the panel and tagged pass/fail reporting from the test kit | Annual rounds produce per-device evidence instead of a signed summary sheet — the form the Authority Having Jurisdiction increasingly asks for |
| EN 54 product evidence (EU and Gulf reference) | EN 54-7, EN 54-5, EN 54-11, EN 54-25, EN 54-3, EN 54-23, EN 54-2 and EN 54-4 configurations with declared operating bands, ingress ratings and drift compensation | Gulf distributors can stock and re-export on one certificate set, and the high-temperature and dust behaviour is documented rather than asserted |
| NIST-traceable calibration and test evidence | Calibration records shipped per lot on instrumentation and test aerosol; the 705 power monitor and the 860 panel log the events the annual report is built from | Documented, per-device evidence for insurers, plant reviewers and AHJs — the reason service firms and integrators consolidate onto one supplier |
Featured profile this report — Fire Alarm Control and Indicating Equipment Profile: the WANLIN-860 addressable fire alarm control panel platform from 2 to 16 loops with up to 242 devices per loop, EN 54-2 and EN 54-4 compliance, cause-and-effect programming, BMS integration over BACnet and Modbus and 4G remote monitoring. Our WANLIN-860 panel is where system integrators earn their margin: device mapping runs itself on first power-up, the per-device sensitivity readout turns annual servicing into a report instead of a walkaround, and the BACnet and Modbus gateways put the fire system on the BMS the building already has. Every carton ships with multi-language manuals (Arabic / English / Urdu / Hindi / Tagalog / French), the EN 54 certificate set and country-specific documentation folders ready for Jordan customs clearance and the SABER shipment file.
| Sourcing challenge | Industry problem | Wanlin solution |
|---|---|---|
| Shipment certificates are raised after the container sails | Importers discover the SABER Product Certificate of Conformity was never registered for the product family, and the Shipment Certificate is then chased under demurrage — the cheapest device on the quote becomes the most expensive one on the quay | Product families are registered with the correct HS classification before the first order, and the technical file, test reports and packing lists are prepared by the factory so the SCoC is issued against the booking, not after it |
| Multi-vendor projects splinter the compliance file | Detectors from one factory, panels from another, sounders from a third — three certificate sets, three lead times, three spares lists, and a Civil Defense submittal nobody can reconcile | The WANLIN wireless fire line covers detection, call points, signalling, control, gateways, instrumentation, power monitoring and gas detection on one certificate set, one purchase order and one spares program |
| Occupied buildings cannot take a re-wire | Operating hotels, hospitals, schools and live warehouses cannot accept new cable runs; conventional zone conversions stall on installation hours and on the disruption the client will not approve | Wireless RF 433 / 868 MHz interconnect, LoRaWAN, NB-IoT and 4G telemetry variants, plus the 860 panel's automatic device mapping, cut both the cable and the commissioning window |
| Heat, dust and solar load shorten device life | Rooftop plant rooms, substations and open yards in the Gulf run well above the temperature band a catalogue device is rated for; chambers drift, housings chalk, and false alarms follow in the first summer | Declared operating temperature bands and ingress ratings per model, drift compensation on the photoelectric chamber, IP65 weatherproof call points and sounder strobes, and high-ambient behaviour documented rather than asserted |
| Annual inspection needs documented, per-device evidence | Handwritten schedules draw queries from insurers and the Authority Having Jurisdiction; rework after a query erases the margin on the whole contract | The 860 panel's event log, the 705 monitor's per-circuit history and the test kit's tagged pass/fail reporting produce the report as the round is walked |
| Spares, consumables and obsolescence gaps | Spot-buy devices arrive with no spare bases, no glass packs, no aerosol supply plan and no five-year parts commitment; the system is unserviceable within three years | Spare bases, glass packs, reset keys, chambers, canisters, battery packs and pole sections ship against a program sized to annual volume; a five-year spare-parts window and documented obsolescence path are included for tenders |
| Supplier type | Advantages | Disadvantages |
|---|---|---|
| Wanlin (Factory Direct) | 15-year manufacturer; the WANLIN wireless fire line covers detectors, call points, sounder strobes, the WANLIN-860 addressable panel, pressure and level instrumentation, the WANLIN-705 smart power monitor, gas and CO detectors and test kits; CE, RoHS, REACH, FCC, EN 54 and SASO / SABER documentation with NIST-traceable calibration in every shipment; OEM from low four-figure unit quantities; custom colours, logo printing and carton branding; 30-50 percent below brand-equivalent pricing | Newer brand recognition in markets where engineers were trained on the incumbent European and North American panels |
| Incumbent Global Fire Alarm Brands | Decades of specifier familiarity, deep standards-body relationships, established distributor networks | Premium pricing across the catalogue, closed protocols that lock the service contract to the brand, long quoting cycles, and limited private-label or custom programs — which is exactly why Jordan distributors benchmark the WANLIN wireless fire line against them |
| Local Resellers and Importers | Fast delivery from local stock, on-the-ground support, familiar invoicing | No factory test data, no calibration records, no consolidated compliance pack, no spares program, quality variance between lots, no OEM path for their own brand |
| Generic Wholesale Spot Buys (marketplace-style) | Lowest unit price on single-carton orders | No EN 54 or CE file, uncalibrated sensing elements, no ingress rating, no warranty service, no spares — a device that fails at handover costs the whole commissioning window |
NEOM is the giga-project under development in the north-west of the Kingdom, with The Line, Oxagon and Trojena as its announced developments. Its published ambition for fully instrumented, data-driven infrastructure has made it the regional reference point for what a modern fire detection layer is expected to deliver — device-level status, remote diagnostics and integration into the building platform rather than a zone light on a wall. NEOM
Source: NEOM
Partner: A Jeddah facilities group operating hotel towers and serviced apartment buildings that run at very high occupancy through the pilgrimage seasons, sourcing WANLIN-309 multi-sensor detectors, IP65 sounder strobes, WANLIN-365 gas detectors and the detector test and assessment kit for its annual servicing rounds.
Deployed: WANLIN-309 multi-sensor detectors, IP65 sounder strobes, WANLIN-365 gas detectors, detector test and assessment kit, Jordan-focused configuration with local-language manuals, EN 54 and project documentation packs, and a spares and consumables program sized to the partner's annual project volume
Timeline: First production batch shipped 23-30 days after sample approval; the partner's crews commissioned 250 project sites across the first season, with the documentation folders packed per site at the factory before sailing
| Metric | Result |
|---|---|
| Documentation acceptance | The consolidated EN 54 and project documentation pack cleared the approvals review on first submission — the partner attached the same files to its next three tenders without rework |
| Installation hours | Automatic loop mapping on the 860 panel plus twist-fit detector bases cut the commissioning window on standard sites from two visits to one |
| Handover quality | Per-device sensitivity readout and the event log replaced the paper schedule at handover; facility managers signed off against the exported report instead of a clipboard |
| Project economics | Consolidating detection, signalling, control and instrumentation onto one purchase order landed 30-40 percent below the brand-equivalent benchmark, with spares pricing locked for the season |
"The group's problem was nuisance alarms from cooking aerosol and steam, plus a servicing window measured in hours rather than days. Wanlin specified multi-sensor heads on the kitchen-adjacent floors, supplied the test kit with HFC-free residue-free aerosol so rooms could be returned to service immediately, and packed Arabic and English manuals per carton." — Representative, Jordan Program Partner
Location: Wanlin fire protection products QC floor, Longgang District, Shenzhen, China
Date: September 26, 2026 | Ambient: 34 C, 79 percent humidity | Equipment under test: WANLIN-860 Wireless Fire Alarm Control Panel (4G / WiFi / Ethernet) (Ethernet host configuration — Wired Ethernet port for permanent installations, with BACnet and Modbus to the BMS and a static IP for the building's network policy)
We wired a Madaba-bound WANLIN-705 smart power monitoring device on a test distribution board and injected stepped residual current plus series and parallel arc signatures, timing the trip and the cloud alert on each event.
On-site findings: 675 recorded events were reviewed against the specification sheet; response behaviour matched the printed rating across the test window, the enclosure and ingress checks held at the documented rating, and no diagnostics or connectivity anomalies were raised. The calibration record for the lot, the EN 54 certificate set, the declaration of conformity and the SABER shipment file were placed inside the first carton of the batch before it closed.
"Residual current tripped inside the declared time at the set threshold, the arc-fault channel discriminated the injected arc from a normal switch-on inrush, and every event reached the cloud dashboard with the SMS alert following inside the notification window." — Senior QC Engineer, Madaba Program
Verified against the spec sheet: The WANLIN-705 monitor tripped inside the declared residual current window and discriminated arc signatures from normal inrush
| Scenario | Recommended WANLIN configurations | Key features |
|---|---|---|
| Hotels, serviced apartments and pilgrim-season accommodation | WANLIN-303 wireless photoelectric smoke detector, WANLIN-309 multi-sensor detector, WANLIN-656 sounder strobe | Multi-sensor heads on kitchen-adjacent floors to cut cooking-aerosol nuisance alarms, wireless interconnect that adds rooms without a re-wire, HFC-free residue-free testing so a room returns to service the same hour |
| Offices, government buildings and mixed-use towers | WANLIN-303 photoelectric detector, WANLIN-222 resettable call point, WANLIN-860 addressable panel | Per-device sensitivity readout and cause-and-effect programming at the panel, no glass to replace after every drill, one submission dossier for the whole floor plate |
| Data centers, server rooms and telecom shelters | WANLIN-309 multi-sensor detector, WANLIN-860 panel with BMS gateway, WANLIN-705 smart power monitor | Multi-criteria detection to cut nuisance alarms, BACnet and Modbus to the BMS, per-circuit leakage and cable-lug temperature logged before anything smokes |
| Oil, gas, petrochemical, power and substation sites | WANLIN-340 A1R / A2S heat detector, WANLIN-770 pressure transmitter, WANLIN-780 level sensor, IP65 call point | Heat detection with declared high-ambient band, weatherproof signalling for open plant areas, riser pressure and tank level on the same Modbus map as the fire system |
| Warehouses, logistics hubs and cold stores | WANLIN-340 A1R heat detector, 110 dB(A) sounder strobe, WANLIN-868D panel with LoRa gateway | High-output signalling for racking aisles, LoRa coverage across large footprints without cable runs, heat detection that holds its rating at low temperature |
| Hospitals, clinics and schools | WANLIN-309 multi-sensor detector, resettable call point, 100 dB(A) sounder strobe | Staged evacuation with cause-and-effect, no consumable glass on every drill, wireless extensions into occupied wings without closing wards |
| Residential towers, labour accommodation and student housing | WANLIN-303 / WANLIN-307 sealed-lithium standalone smoke alarm, WANLIN-365 gas detector, WANLIN-710 smart circuit breaker | 10-year sealed battery removes the annual battery visit, wireless interconnect across up to 40 devices, LPG and CO protection with solenoid shut-off on kitchen and boiler adjacency |
| Battery energy storage, EV charging bays, solar and wind assets | WANLIN-309 multi-sensor detector, WANLIN-705 smart power monitor, WANLIN-868D gateway | Off-gas and thermal runaway precursors picked up early, per-circuit leakage and temperature logged on the same dashboard, remote reporting from unstaffed and dispersed sites |
1. Distributor and Importer Programs
For fire protection distributors, safety equipment importers, electrical wholesalers and industrial supply chains in Madaba and Jordan. Volume pricing from pallet and container levels, the full WANLIN configuration family per market, CE, RoHS, REACH, FCC, EN 54 and SASO / SABER documentation, NIST-traceable calibration records and SBC 801 / NFPA 72 reference packs with every lot, country-specific manuals and carton printing, regional branding, spares kits and marketing support for local sales teams.
2. Private-Label and OEM Programs
For fire alarm brands, electrical brands and safety-equipment chains building their own catalogue in Jordan. Custom colours, logo printing on device and cabinet, branded cartons and manuals, custom carton inserts, multi-language documentation, and OEM programs from low four-figure unit quantities with a 30-day DOA replacement SLA per order.
3. Contractor and System Integrator Programs
For fire protection contractors, system integrators and facility management groups in Madaba running project pipelines. Project-matched device schedules, panel cause-and-effect pre-programming, BACnet and Modbus register maps, cloud account provisioning for the 705 monitors, commissioning briefings for the first project, and spares allocation held against the project programme.
4. Cross-Border Trader and Sourcing Agent Programs
For trading companies, sourcing agents and import brokers in Madaba and Jordan seeking a reliable Chinese source factory for fire protection products. Complete export solutions: EXW, FOB, CIF and DDP shipping terms, T/T or L/C payment handling, HS 8531 classification support, consolidated CE, RoHS, REACH, FCC, EN 54 and SASO / SABER documentation, neutral or custom packaging, localized manuals, and commission-based or volume-based partnership structures for long-term trade cooperation. Global partners, export trading companies and local distributors are welcome to contact the Wanlin export desk for exclusive-territory discussion.
5. Government, Municipal and Infrastructure Project Programs
For civil defence contractors, municipal facility departments, airport and rail operators and public-building authorities in Madaba running compliance programmes. Site-matched device selection, pilot batches, consolidated submission dossiers, crew training for the first commissioning, and a five-year spare-parts window with a documented obsolescence path across multi-year maintenance contracts.
A: The line is built to the standards approval bodies and reviewers actually enforce: EN 54-7 smoke detectors, EN 54-5 heat detectors, EN 54-11 manual call points, EN 54-25 components using radio links, EN 54-3 sounders, EN 54-23 visual alarm devices, EN 54-2 / EN 54-4 control and indicating equipment, EN 14604 residential smoke alarms, EN 50291 CO alarms and EN 50194 gas detectors, with CE marking under the Construction Products Regulation, RoHS, REACH and FCC files, the UL 217 / UL 268 / UL 521 / UL 864 project path where a specification calls for it, SASO conformity assessment support and SABER Product and Shipment Certificate of Conformity preparation, and an SBC 801 / NFPA 72 design and inspection reference pack. NIST-traceable calibration records ship per lot on instrumentation and test aerosol. The certificate set, the declaration of conformity and the manual in Arabic and English ship inside the carton for Jordan.
A: The importer obtains a Product Certificate of Conformity (PCoC) for the regulated product family, then a Shipment Certificate of Conformity (SCoC) for each consignment; without the SCoC the shipment does not clear. Wanlin supports both steps from the factory side — product-family registration with the correct HS 8531 classification, the technical file, test reports and declaration of conformity per model, and packing lists prepared so the SCoC is issued against the booking rather than chased after the container sails.
A: Yes. The WANLIN wireless fire line covers photoelectric and ionization smoke detectors, A1R / A2S heat detectors, resettable and weatherproof manual call points, EN 54-3 and EN 54-23 sounder strobes, the WANLIN-860 addressable panel and the WANLIN-868D gateway platform, WANLIN-770 pressure transmitters and gauges, ultrasonic and radar level sensors, the WANLIN-705 smart power monitoring device with residual current and arc fault detection, catalytic, infrared and electrochemical gas and CO detectors, and the detector test and assessment kit. One purchase order, one certificate set, one spares list — which is what a Civil Defense submission and a handover pack both need.
A: Yes. Wireless RF 433 / 868 MHz interconnect links up to 40 devices across open-plan and multi-storey layouts, 10-year sealed lithium alarms remove the annual battery visit, and LoRaWAN, NB-IoT or 4G telemetry variants report status, faults and battery condition without any local cabling. Where a wired loop is viable, the 860 panel's automatic mapping keeps the commissioning window short.
A: Each model carries a declared operating temperature band and ingress rating rather than a generic "indoor use" claim: photoelectric chambers run drift compensation so contamination is flagged rather than silently shifting the threshold, heat detectors hold their class curves at the declared setpoint, and the outdoor call points and sounder strobes are IP65 with gasketed enclosures for plant rooms, roofs, yards and coastal sites. The documented band is what the Madaba reviewer reads on the datasheet.
A: The 860 platform carries an RS-485 repeater bus, Ethernet, BACnet and Modbus to the BMS, dry-contact fire and fault relays and an optional 4G or NB-IoT remote monitoring gateway. Automatic device mapping runs on first power-up, the event log records device, time and state, and per-device diagnostics are readable at the panel or from the gateway — so the annual servicing report is exported, not re-typed.
A: Sample cartons typically ship within 10-15 days and production project batches 28-35 days after approval. The WANLIN wireless fire line carries a 3-year limited warranty on detectors, panels and signalling devices (2-year on instrumentation), a 12-month warranty on battery packs, 30-day DOA replacement, and a five-year spare-parts window with a documented obsolescence path for tenders that require a long service-life commitment in Jordan.
A: Yes. We are a source factory supporting cross-border traders and import agents with EXW, FOB, CIF and DDP export terms, T/T and L/C payment handling, HS 8531 classification support, SASO and SABER documentation preparation, consolidated EN 54 and CE files, neutral or custom packaging, Arabic and English manuals, low MOQ sample-carton orders and volume-based partnership pricing. Wanlin is recruiting global local partners, export trading companies and sourcing agents in Jordan, and exclusive-territory discussions are open through the export desk.
For wholesale pricing, sample carton requests, CE, RoHS, REACH, FCC, EN 54 and SASO / SABER documentation, NIST-traceable calibration records, SBC 801 / NFPA 72 reference packs, OEM and private-label customization, spares and consumables programs, and partnership discussions in Madaba and Jordan: